|
light switch
Have any of you guys changed the wiring on your car when you flip up one way the running lights burn, then the second way the headlights/running lights burn. Currently the first tab does not do anything different from the second tab.
Looking at mine the white/blue stripe wire is connected to the same pole as the brown wires. Then you have a seperate red wire (i'm assuming the hot wire) and a blue/yellow stripe wire. Also, i can't get my reverse speedo to work. I installed the gear from Finishline to the back of the gauge but no luck. I'm afraid it may be in the transmission part. Any thoughts? Thanks, Robbie |
| All times are GMT -7. The time now is 02:00 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: