- -
Doors?
(
http://www.clubcobra.com/forums/kirkham-motorsports/78946-doors.html)
| big-boss |
05-15-2007 11:39 AM |
Doors?
Before I tear a bunch of stuff up, How do you remove the doors?
|
| computerworks |
05-15-2007 12:09 PM |
1 Attachment(s)
...4 bolts ...on the hinge.
What else are you planning to tackle? :p
(...just kidding) ;)
|
| big-boss |
05-15-2007 12:18 PM |
Du! Thanks for the picture though.
I have a little cover under the hinge-looks like yours is already off. How do you take the pin out?
|
| computerworks |
05-15-2007 12:24 PM |
Quote:
Originally Posted by big-boss
...looks like yours is already off.
|
on my car... everything is off. :rolleyes:
Quote:
Originally Posted by big-boss
How do you take the pin out?
|
I wouldn't disassemble the hinge pin. Are you talking about the plastic hinge cover being in the way? That should come off and then I'd unbolt the doors. |
| big-boss |
05-15-2007 02:06 PM |
That is what i needed to know. I will leave the pin alone, final. Easy enough. Thanks again.
Are going to put on an oil cooler for the diff?
|
| computerworks |
05-15-2007 02:07 PM |
yes. I am.
|
| RedCSX1 |
05-15-2007 02:18 PM |
The best suggestion I can make......
Quote:
Originally Posted by big-boss
That is what i needed to know. I will leave the pin alone, final. Easy enough. Thanks again.
Are going to put on an oil cooler for the diff?
|
Big Boss, Conact Tom at Tom's Motorsports and talk to him about your Rear end set up and oil coolers. He has tons of experience with these rear ends and you did say you wanted to built everything perfect on this Cobra. There are certain issues with these rear ends which I am sure Pat (Gasholes) would certainly be happy to share with you.
Cobra. http://tomsmotorsportsinc.com/Welcome.html |
| rsimoes |
05-30-2007 06:55 AM |
What issues are there with the rear end? BTW, which rear end are you talking about?
|
| computerworks |
05-30-2007 06:59 AM |
Quote:
Originally Posted by rsimoes
What issues are there with the rear end? BTW, which rear end are you talking about?
|
He is referring to the KMP diff...there was a problem with the diff slinging too much fluid out the vent hole in the cover. Baffelling or replacing the diff cover with a Jag unit or the one from Tom's seemed to be a cure. |
| Murphy |
05-30-2007 07:23 AM |
Kirkham part 00064
Diff breather kit. You can see a picture on the Kirkham website. Click on the item number on their parts price list.
|
| All times are GMT -7. The time now is 02:14 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
