|
Polishing aluminum w/ a cyclo
For those with polished cars, have you noticed that using a cyclo and fleecewraps (from Tom - PerfectPolish) and Nuvite can leave a few small swirl marks in the finished product?
I'm using his technique to polish some of the panels in my FFR (trunk, firewall) and they come out outstanding, except in direct sun i can see a few defects ; more under a hallogen light. Always in the final 'S' polish stage, and always from the cyclo (because if I hit them again they move to another spot on the panel). Any tips for the final 'S' stage polish? I figure people who've done this on an entire car must have developed a flawless technique. Like if you use too much 'S' it may leave a few marks behidn? etc... etc... =) |
I found the Cyclo to be quite a handful and it produced the results you described. So, I went over mine by hand in an attempt to remove the more conspicuous spots. That seemed to help.
Regardless, the sun reveals more flaws than you'll see with regular flourescent lights, and I'm not convinced that all the work in the world will ever remove all defects that are apparent under regular sunlight. I polished mine last April and now need to redo it. |
I had asked Tom from Perfect Polish about an alternative to the cyclo and he offered up another polisher that had a number like "7242" (that's not it), but was easier to use. He did not comment on whether it could do a better job than the cyclo, but I may try it. I think I have the correct buffer number somewhere in my files.
|
Cyclo
After 3 years I finally realized that that LESS S is Best, my 1/4 lb jar will last 4 years and I do my car every April and September. Also another method that helps is changing the fleece wraps more often (pain) to avoid residual build up. Change both wraps for each panel. When done wipe residue with 2 MICRO FIBER CLOTHS one with a little (very little) WINDEX without amonia any then use dry cloth for final luster. Nuvite also has a liquid polish as a finish coat that can be using the Micro Fiber Clothes. After all of that you will have a better job however bright sun with humitity will still annoy you, just not as much. I hope this helps a little. Have Fun and a Happy Holiday
|
Quote:
|
I've done a bit more polishing using 6'' instead of 3'', and it's funny because every single time the panels come out picture perfect, whereas before it was a crap shoot..... sometimes perfect, sometimes random swirls all over
I wish I could explain why, spacing the 'S' every 3'' makes ranodm swirls appear all over, but 6'' makes a perfect finish. I know less is more, but that's just really strange! |
Having a brushed finish allows me the time to read threads like this about how to maintain a polished finish. :p
Yes, I'm lazy. |
Quote:
You polished Kirkham guys are a rare breed. I don't have your patience. -Dean |
Well, if you're truly lazy, have some extra money AND have a polished finish, you could hire someone to maintain the polished finish for you.
There's some polishing guru in the Bay Area that charges $125/hour if you can believe that. |
Heck, there's some ladies in North Beach that'll give you a polish job cheaper than that...at least they look like ladies.
|
The polish guru in the Bay Area is recommended by Tom at Perfect Polish.
Jamo, I think you mean the Tenderloin, not North Beach. It may have been North Beach in the 1960's and 1970's, but it's more of family-oriented area of the City now. |
Dude...I have clients in North Beach. Make it West Hollywood if you'd like.
:cool: |
Sorry. My apologies. Happy New Year.
|
Quote:
I have heard that a 50/50 mix of S and Meguiers Hot Wheels Alloy/Mag polish is a good way to get rid of the swirls in the final stages of polish. The cyclo is a pain to master. You can use the black pads with the satin bonnets covered with the wraps. I have heard of others that use the wool mini pad bonnets under the wraps. Cleanliness is key. |
Quote:
|
ROd,
I have developed some oxidation on the Kirkham and want someone who is experienced with aluminum polishing processes to handle it. You mentioned a referral from Tom at Perfect Polish? Thanks! AL |
Quote:
|
Keep in mind where Kirkhams come from, you need to hire a Polish polisher to do it right!:LOL:
|
Quote:
|
| All times are GMT -7. The time now is 04:37 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: