![]() |
Kirkham Speedometer question
Does the Kirkham speedo include the sending unit? Does anyone have the dimensions of the sending unit. My trans tunnel is pretty tight and I don't have a lot of room right there.
Would it be possible to use a wheel speed sensor instead? Something like one of these? http://www.magsensors.com/geartooth.html#he Thanks a pile. |
I belive the sensor doesn't come with it. (it's setup to use the standard Ford sender)
The sender comes with the TKO, but other trannnies will require adapters. What kind of trans you running? Here's the Ford - GM senders: http://www.speedhut.com/products-gau...uto-Sensor.htm (bottom of page) |
Quote:
From what I remember the adapter for a Ford transmission sticks out a couple of inches. On the Rush we built, we used the ABS (wheel speed sensor) off the rear wheel. It has worked great. |
Jim,
We have worked with Speedhut to develop the gauge to work with the factory BDR/BMW sender. Will be selling them through our store very soon. |
Quote:
How soon? Like Monday? I've finally got fed up with the leak and I have pulled the speedo and cable out during some other repairs. I plan on having this resolved by the end of the week. This is peak Cobra season in Florida. I did find the BMW sendor in the diff. This seems like a good solution. Although I have no plug or harness for it. That should be an easy work around. I don't have "a couple of inches" for a sending unit. Max is about 1.5". / |
We can get a set together but it is more than a week. They are made to order since you get to pick the face, bezel, illumination, etc.
You could likely get them sooner from Speedhut direct. Make sure you talk with them and explain your application so they can be dialed in for your BDR. |
| All times are GMT -7. The time now is 02:28 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: