|
gauges stewart warner
Hey guys I have a question about the stewart warner gauges.Do they need a special stewart warner plug-ins or can you wire the gauges up individually with electical conectors?There is a set on ebay but with not connectors so I was just wandering if they have a special conector.If I can just wire them in directly I will buy them.
Thank James |
I have a set of mechanical stewart warner gauges, and a set of electrical gauges. The mechanical ones, ie. speed uses standard speedometer cable; temperature has a hard line with a special bulb that goes into the intake, oil pressure uses a line from the block; oil temp has a bulb with hard line; tach and amp are electrical.
On the electrial set, they connect to sending units for fuel, oil pressure and temperature. The sending units need to match the ohms needed for the stewart warner guages. If you already have sending units they may or may not work. I would hook them up on a bench first and see using known tempertures in a pan of water. If they are not the right ones, you will need to get sending units that match the stewart warner gauges for ohms. Hope this helps, Jim |
| All times are GMT -7. The time now is 09:30 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: