|
my rear end
Has anyone narrowed their rear end here locally in Colorado, to get the deep dish effect? And if so, how much was this?
|
mwelch,
Hopefully you are asking about your car and not your own rear end. I asked our Mile Hi Cobra Club for some ideas and only recieved ideas on your car rear end (Except for a few that think my rear end is too wide - mine, not the cars) Here they are: Mark Williams in Longmont. May be the best in USA. All alchhol and top fuel use his stuff Denver Drivetrain. When I needed my differential shortened and new axels I had an outfit called Western Drivetrain at 1790 Jasper in Aurora, phone 303-364-8098 do it. The guy is a big time Ford guy and really knows his stuff. As far as price it depends on what else you have done. I had it shortened, Moser axles, tapered roller axel bearings, US Gear 4 spider Traction Lock, my ring and pinion and my case and housing, adapted Ford Racing disc brakes, and he did the complete set up. The price was around $1100 total but that was a few years ago. Hope this helps. I had my 8.8 narrowed 3” at Front Range Drive Train on South Federal. I paid 2,000.00 but I had the “C” clips removed and the bearing move to the outside and also had Weldwood brakes add and the axles replaced with 1 ¼ “ 28 spline. Hope this helps. Dick Thompson |
I think I spent $2800.
Ford nine, 31 spline axels, big Torino bearings, four pinion trac-loc with 3.5 gears. Narrowed to 50 inches. Power Coated. |
Call Front Range Driveline. Ask for Brian or Bill. Tell them Olen sent you.
|
There are two on ebay now, I was looking for a friend who needs one for a 1964 falcon but these won't work. Might be right for your application........
|
| All times are GMT -7. The time now is 06:44 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: