|
Engine work needed in Minnesota
I tried to perform a leakdown test on my Lincoln 32valve engine and wasn't happy with the out come. Upon further inspection (removed the intake) I found the build up on the secondary valves had reached critical mass and was starting to break off and enter the valve seats.( I don't think grampa ever got on the throttle) This will require me to tear into this engine deeply (way more than I planed) so I've decided to do the right thing and have it gone through and freshened up and a couple of small upgrades (fixes) done also. Who in Minnesota does work on these monsters and can I trust the guy to do a good job. Just need the block checked out and the heads gone through.
This is where it gets spendy, Patrick |
Wait, there may be another way.
I do not know if this will work, but we used to do the Coke bottle clean out on cars before we tuned them. If you remove the catalytic converters, you might be able to pour water into the intake while the engine is racing ( you working the throttle to make sure it does not stall ). The water breaks apart the junk in the combustion chamber as well as around the valves. Not sure it will work on the injected caddy, but it beats the heck out of $1500 for a valve job. :D |
fasterpatrick, get in touch with a company called
Total Engine Service located in Bloomington. Sorry I do not have the phone number memorized but you can find them on the web or in local yellow pages. Good luck. |
fasterpatrick, that just seems pretty drastic knowing what you have. I think I’d call Dan Mattila, Off Road Specialties in Blaine. Telephone 763-785-0228. Dan knows Ford motors well and could probably offer some advice.
Roger |
fasterpatrick, that just seems pretty drastic knowing what you have. I think I’d call Dan Mattila, Off Road Specialties in Blaine. Telephone 763-785-0228. Dan knows Ford motors well and could probably offer some advice.
Roger |
Roger, did you look at those dates that was for the original junkyard motor I bought a rebuild long block for what the head work would have been.
Patrick |
Patrick,
No, guess I missed that. Funny thing the tread came up in my e-mail as a new post on CC. Best, Roger |
| All times are GMT -7. The time now is 08:09 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: