|
Shelby Cobra College Project
Hey lads, Im new on here.. Doing a project at the moment where i have to do a 3D model of a cobra in CAD all the bodywork, interior, engine, the works.. 5 of us have 10 weeks to complete the project so im hoping some of yea can give me a hand. im looking for fairly detailed drawings to work off or anything else that can help me. Exploded views of the car would also be a great help. i have a model car in the post so that should be of some use..
Any advice or help will be greatly appreciated? this is basicly what i will end up with only more detailed with the engine parts and stuff moving... http://www.3dcadbrowser.com/preview....odelCode=22201 Thanks again... |
What college do you go to?
Bill S. |
University of Limerick in Ireland.... doing a CAD module this term
|
If you guys can find a way to obtain this poster from artist David Kimball, that would give you a lot to work with. There are many sources on the Net to purchase one from.
http://www.bre2.net/mm5/graphics/000...poster_lgt.jpg I looked at your model car renditions and it looks like you have patterned a Factory Five Racing body style vs. an original (the squashed fenders in the rear are the tip-off for me). If you're trying to map an original CSX car then I would look for ways to flatten that out a bit. Also the ERA web site has some really great references: http://www.erareplicas.com/427/cindex.htm http://www.erareplicas.com/427/profiles/index.htm Good luck! -Dean |
Best wishes to you...That's a very ambitious project you are taking on. I wish I could help you but I'm new here and just learning all about the hobby. I do wish you the very best...I'm sure you'll do a great job mate!
Bob |
| All times are GMT -7. The time now is 11:54 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: