|
17 inch from Vintage Wheels
1 Attachment(s)
Vintage Wheels is now offering pin drive knock off wheels in the following sizes 17 x 8.5 and 17 x 10.5 .
The available backspacing is 4.25 , 4.65 and 5.00 inches. The wheels are scaled up versions of the 15 inch and therefore retain the traditional 6 spokes. The introductory price for 4 x wheels ,adapters and pins plus spinners is $ 1895 Please see attached photo . Bob Lacey 619 952 4717 :) |
I just recieved my 15" Vintage wheels and they are a work of art. Bob, thank you for such a nice product and incredible customer service. Mike Telow
|
Bob, will they fit on Trigo Adapters?
and if so how much for just the wheels? Tony |
Bob, I will be getting you some better photos of my white 17" wheels I just recieved from you by this weekend. Until then here are a couple of photos of the front and rear wheels for everyone to enjoy.
Front: http://a0.cpimg.com/image/C0/B3/4981...-02000154-.jpg Rear: http://a9.cpimg.com/image/C3/9A/4989...-02000180-.jpg Don |
Hi Tony
The wheels will fit the Trigo adapters the except for our drive pins which are 19.4mm .The price for wheels and drive pins is $1400 Bob |
Don
thanks for the great pictures ,how is the table ? Bob |
Bob,
Gotta have those wheels. I'm building an EM Generation IV and need 5.5 backspacing on the rear to accomodate the 5 lug adaptor. Any hope?? Thanks Greg |
Hi Greg
5 inch is the max at present but we are working on it !! Bob |
Don:
How did you get your wife to allow you to put them on the dining room table. Mine still will not allow me to even put a shop manual on the table. Jim |
Jim, it's easy. I bought my wife a 2003 Acura 3.2 TL Type S with the navagation system a year and a half ago and 2 months later we got a devorce. I sure do miss her ---- the Acura that is LOL.
Don |
Will it fit
Hi Bob,
Great looking 17" wheels, Great price! Will they fit a build year 2000 SPF? It currently has the South African WAW 15" will I need new spinners, adapters and pins? Thanks Rod |
Hi Rod
No problem ,you should only need the wheels ,they will fit straight on to your adapters and you can use the same spinners Best regards Bob |
Bob,
Just curious but do you have those in 6 pin as well? |
We do have 6 pin available in the same width with 3.75 front and 4.5 rear backspace.
Bob |
Any chance of an FIA wheel?
|
Hi Mr Bruce
At this stage we have no plans to make the 17 inch FIA wheel Bob |
Here are a few photos of my new 17" Vintage Wheels with tires mounted.
Yokohama Advan 032R, 255/40/17 for the front and 315/35/17 for the rear in the hard compound. http://a1.cpimg.com/image/01/DF/5014...-0200017E-.jpg http://a0.cpimg.com/image/00/DE/5014...-0200017F-.jpg Test fit on Len's Hula Girl, my car will be a midnight blue pearl which these wheels in white will look outstanding along with the white side pipes. http://a8.cpimg.com/image/FE/DE/5014...-0200017E-.jpg http://a9.cpimg.com/image/FF/DE/5014...-0200017E-.jpg Don |
Thanks Bob, for the info.
Tony |
Len’s Hula Girl gets a new set of 17” pin-drive Vintage Wheels in gray. Len should be getting his tires in the couple of days.
http://a4.cpimg.com/image/C0/40/5039...-028001E0-.jpg http://a5.cpimg.com/image/C1/40/5039...-028001E0-.jpg http://a6.cpimg.com/image/C2/40/5039...-028001E0-.jpg Don |
Bob, can these be ordered all polished (centers). If so, additional charge?
|
| All times are GMT -7. The time now is 06:59 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: