|
Superformance Ball Joints Early Model
I have an early # 127 Superformance that I would like to replace or upgrade OEM ball joints. I spoke with Cobra Valley and I dont want to fabricate A-arms (because they no longer carry oem ball joints of such an old vintage) and the required ball joint sleeve...it sounds too difficult and $$$. So, my question is: Does anyone have knowledge of an American made ball joint that would be a direct replacement? I have heard that Chrysler has a ball joint (press in) which might fit (Lower, Chrysler K727) but I don't know for certain if it will work. Thanks in advance for any insight/knowledge you can share.
Ron |
A lot of the racers use that screw in style which is I believe what they are, not the press in.
The Cobra Valley ones are a super upgrade for them I have installed on a couple of SPF's. If you wanted replacements for the 727's they are here, godspeed Bill. Speedway 1960-66 Chrysler K727 Style Lower Ball Joint - Speedway Motors, America's Oldest Speed Shop |
You may have seen this but in case not:
http://www.clubcobra.com/forums/shop...ll-joints.html Here's the Cobra Valley page Cobra Valley's R/T Super High Performance Ball Joints Hope that helps |
| All times are GMT -7. The time now is 09:39 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: