Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   NW Cobra Club (http://www.clubcobra.com/forums/nw-cobra-club/)
-   -   Who sells McLeod clutches locally (http://www.clubcobra.com/forums/nw-cobra-club/10085-who-sells-mcleod-clutches-locally.html)

Michael C Henry 08-04-2001 07:43 PM

Who sells McLeod clutches locally
 
I did it again.After working w/carbs I deceided to drive the car to the car wash.The throw out bearing froze,scarring the Crap out of me.I nursed it home .Upon diiassembly it was descovered that the fingers of the pressure plate were damaged,Disk was thin also.I need a McLeod 11 1/2" clutch and pressure plate #SFR0171.The McLeod web site has a lot of pages not responding.Schucks sells Centerforce,and they offer an 11".I would also like to mention the Wednesday school at SIR that I've paid for and isn't refundable. Who sells McLEOD clutches locally? I'll see about getting my used stuff rebuilt later . HELP PLEASE

Jay Torborg 08-04-2001 07:49 PM

Dark Horse Performance
 
We bought our McLeod clutch and hydraulic throw-out bearing from Dark Horse Performance. Their website is:

http://www.darkhorseperformance.com

They are located in Renton.

- Jay

Michael C Henry 08-05-2001 03:33 PM

new wrenkle
 
After talking to several sources including Darkhorse Performance. It looks like everybody ( Mcleod ,Centerforse ,Hays) has discontinued the 11.5" but offers an 11" and a 12" which in my case takes another flywheel.The end is never in sight.I don't see me having this car ready for Wednesdays SIR driving school.= $120 not refundable.

Michael C Henry 08-06-2001 12:25 PM

Actually talked to someone
 
I talked to Les at McLeod Industries. $85 to rebuild my pressuerplate.$85 to replace the 11.5"the steel heatshield in my alluminum flywheel or $120 to machine and install a12" steel heatsheild in my alluminum flywheel.Thats the way I'm going.Still sounds like two weeks and I'll miss the school.

Jay Torborg 08-06-2001 12:48 PM

Bummer...
 
Missing the class is really disappointing. But at least you found a reasonable cost solution to fixing your clutch.

Can you tell me a little more about the class you were going to take? I'd be interested in attended once our Cobra is on the road.

- Jay

Michael C Henry 08-07-2001 07:29 PM

class
 
It's the WASAAC lapping clinic at SIR.Iwas attending as a beginner. Its discussed in this forum.


All times are GMT -7. The time now is 04:04 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: