5.0 Engine any local interest?
 

Hey guys, I am trying to gauge the interest in a complete 5.0 engine I bought for my '66 mustang project that I never installed.

Here are some of the details:
5.0 out of a 89 or 90 mustang. Purchased and pulled from a wrecked car (while I supervised) from a all ford junkyard over by PDX (can't remember their name) back in '97 or '98. The car had ~40K miles on it and it was a rear ended if I remember right. I tore the engine down to check it out and only needed to have a valve job done to it by a machine shop. Everything else looked brand new, cylinders where excellent. I reassmebled the long block with new Felpro gaskets and painted it ford blue. I bought a new Ford Mororsport flywheel, but don't have a clutch. It has all the wiring, sensors, etc. including small items like the fuel pump shutoff from the trunk. Included are all the accessories including a new A/C compressor. I have the cobra 70MM MAF kit for it which includes the computer, 24# injectors, and 70 mm MAF. I also have the stock MAF and 19# injectors. All other parts are 100% stock. Lots of parts have been beadblasted and cleaned/painted to new appearance. It is assembled as a long block with the intake and pan off for inspection.

I also have a complete set of mustang shop manuals (4 or 5 of them) for a 89 mustang that I might sell seperately or with the engine.

Not sure what it is worth, but I have over 1K into it right now. If anyone needs a motor either for a mustang or a FF Cobra this would be perfect. If interested send me an email Russ.Hampsten@oregon.com. I don't want to ship as it is too large in too many boxes, etc.