|
Hydraulic jack rebuild Tacoma?
Anyone know where I can get a hydraulic car floor jack rebuilt (seals) in Tacoma area? Thanks
|
Hi Whitney
Tear that thing apart and take the seals to Williams Oil Filter Service on Puyallup Ave. If they don't have the replacement seals, they ain't available nowhere. Did you get your lawn mowed?:3DSMILE: Jim |
My floor jack was leaking yesterday. I took a look at the way it's built, and their is no removable seal on mine. The "seal" was the tightly machined pump plunger. As this "seal" is now leaking, I'd have to get a new plunger machined to fit the wear of the plunger hole.
I just went down and purchased a new, aluminum floor jack that came with a low-belly creeper and aluminum jackstands. $179. DD |
Whitney,
Jim is right if Williams doesn"t have it you cant find them any where else, also Williams has all the An fittings for alot less than anny where else. Jim was there not a place just off center st. that rebuilds jacks, etc. Andy:LOL::o%/ |
My 20 year old Walker/Lincoln floor jack was leaking down. After not being able to find somebody to rebuild it for a price less than a new jack, I went a different route. I changed the oil in it with some jack oil that I found at Advance Auto Parts. This new oil had some sort of stop leak/seal conditioner in it. It did not solve my problem at first, but after 4 days, my jack worked good as new & has been for the last year. Cost was about 5 bucks.
|
I did some checking. Apparently the jack (NAPA) I got was a Walker/Lincoln. Universal in Seattle were the only ones I could find who still rebuild cylinders and they start at $200. The search goes on and eventually I will pull it apart; make a big mess; and have a bunch of jack parts available.
|
Whitney,
There is a place in Tacoma that rebuilts all types of Jacks etc, I had them due several of my lifts, I just cant remeber the name of the place, there off center st just up the street from right way spring, mybee Jim Gig harbor knows there name. Andy:LOL:**) |
| All times are GMT -7. The time now is 11:12 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: