|
Smiths mechanical oil temp and pressure lines
Where do the SMITHS mechanical oil temp and oil pressure gauge lines run into the 427FE?
Thanks |
The oil temp probe goes in the front of the Aviaid pan on the driver's side. The oil pressure line is attached to a port on the remote filter adapter.
|
cannot fit up front
Well I dropped the engine in last night, and on my FFR frame the front of the oil pan is 1/2 an inch from the front cross member. Not enough room for the sensor!
Now I don't have the trans set and angle finalized, will the sensor sit/angle above below the crossbar when final alignment is made? If not I will need to find another location to drill into. Any thoughts? There is plenty of room on the side of the pan but I don't want to have to drill/tap into the pan if I don't have to. |
My oil temp gauge T's off the remote oil filter on a Superformance
|
Quote:
Can you send me a picture? Thanks |
| All times are GMT -7. The time now is 11:35 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: