Club Cobra
Page 2 of 2 1 2
Show 20 post(s) from this thread on one page

Club Cobra (http://www.clubcobra.com/forums/)
-   Originality Forum (http://www.clubcobra.com/forums/originality-forum/)
-   -   Picture request for Lucas firewall components... (http://www.clubcobra.com/forums/originality-forum/103263-picture-request-lucas-firewall-components.html)

plissken 03-14-2010 03:18 PM
Dan,

Great job on putting together such authentic components!

It appears your DB-10 is marked LUCAS, much more "original" than those seen more often. Is it NOS, refinished or reproduction?

Steve

dlotz 03-14-2010 04:36 PM
Quote:
Originally Posted by plissken (Post 1035870)
Dan,

Great job on putting together such authentic components!

It appears your DB-10 is marked LUCAS, much more "original" than those seen more often. Is it NOS, refinished or reproduction?

Steve
It is OEM but not NOS. I think the date on it is 1962??. It was real tarnished when I got it and I cleaned it up a little.

Bernica 03-14-2010 08:31 PM
Very nice!! Great job there. You're well on your way!

mickmate 03-14-2010 10:20 PM
Hey Dan looking good, great progress. I would ditch the rosey red heim joint and the billet arm. I have the original style throttle arms and can make them any length you need. Let me know if I can help more.

PANAVIA 03-16-2010 03:13 AM
ok, this IS from CSX 3357.

http://www.newmustangranch.com/images/DSC05201.JPG

Taken During Construction

dlotz 03-16-2010 08:29 AM
Quote:
Originally Posted by PANAVIA (Post 1036268)
ok, this IS from CSX 3357.

http://www.newmustangranch.com/images/DSC05201.JPG

Taken During Construction
Steve

Where did you get those gold/zinc wire ties that attach to the firewall? I am looking for those.

Fifty-Two 04-03-2010 09:55 AM
Those appear to be aluminum AN clamps (cad/zinc coating):
http://www.aircraftspruce.com/catalo...s/AN742-D3.jpg

Aircraft Spruce is a great source for them, plus you can buy in small quantities:
http://www.aircraftspruce.com/catalog/appages/an742.php


Great job with the firewall by the way! I was planning the exact same thing for my FFR, and you set the bar SUPER high! Kudos. :D

- John

Fifty-Two 04-03-2010 10:00 AM
Double post.


All times are GMT -7. The time now is 07:33 PM.
Page 2 of 2 1 2
Show 20 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: