Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Originality Forum (http://www.clubcobra.com/forums/originality-forum/)
-   -   Tri Y manifold color and gaskets? (http://www.clubcobra.com/forums/originality-forum/110207-tri-y-manifold-color-gaskets.html)

meangreen92lx 04-18-2011 07:12 AM

289 Cobra exhaust manifold color and gaskets
 
What is the original color of the cast iron manifolds from new? I have seen black, cast iron, and white. Also, any ideas where you can source the downpipe flange gaskets for these manifolds? Thanks guys!!

Dan Case 04-18-2011 10:39 AM

I have never found any traces of any type of surface protection coating on the cast iron Ys, even on low mile near new take off parts. The Ferry Cap and Set Screw COUNTR-BORŪ externally wrenched twelve point cap screws, internal hex lock washers, and studs were all black oxide coated. No gaskets go between the heads and iron Ys. The gaskets for the steel tube headers use to be something that small engine shops could provide. All Ys, headers, gaskets are not equal in performance so owners often report burn outs in less than a year. Over the years corrosion and over tightening can often mean Ys to header flange fits that are pretty bad.

I don't know if he has any left by an owner had gaskets made in a couple of different materials a few years ago that some people have used with success. I don't know if he still has any. Any gasket shop can make parts to order.


Dan

meangreen92lx 04-18-2011 11:23 AM

Thanks again for the good info Dan. Getting close to having this car back on the road. A few more odds and ends.

mr bruce 04-18-2011 11:32 AM

Gaskets-to-Go Custom Gaskets-Home Page


All times are GMT -7. The time now is 02:16 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: