| TimG427 |
01-05-2012 02:19 PM |
Fiberglass door hinge covers
What is the best way to install fiberglass door hinge covers? From pictures I look at, it appears there are two or three screws that hold them on.
|
| mickmate |
01-05-2012 02:51 PM |
They should fit tightly over the hinge plates and just stay on with friction. I have seen some with the retaining screw you mention and some without.
|
| gsharapa |
01-05-2012 07:49 PM |
I installed mine with 1 screw in the top and 1 screw in the bottom but as Mick stated they are pretty tight when pushed on an probably would not come off. They are great as my left knee rest against it all the time driving....
|
| All times are GMT -7. The time now is 10:01 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
