|
Original LUCAS Amps
Looking for pics and PN for Lucas ammeter,
Thanks |
Hi Bernie. Mine was stamped on the side of the case 36275D with 3372 under that number.
The Lucas Equipment and Spare Parts bulletin printed in 1967 lists it as 36275A. It's a -50 to 0 to +50 range, white needle with a red tip. I'll try to post a pic. Cheers Greg |
|
Greg,
Thank you very much !! Bernie |
It can be difficult to photograph these Lucas gauges, what with all the smoke and stuff.
|
Nedsel. If you see smoke from your gauges, you are obviously missing the critical Vaccuum Recovery fitting and hose assembly which is required to recover the smoke and re-inject it into the gauge.
Please be sure to install before operating your vehicle. Cheers Greg |
Quote:
|
| All times are GMT -7. The time now is 12:42 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: