- -
shelley jack
(
http://www.clubcobra.com/forums/originality-forum/116050-shelley-jack.html)
| BERNIE |
06-17-2012 03:28 AM |
shelley jack
Have the correct LJ 22 shelley jack but the jack handle are missing,I'm looking for one set,any infos or pictures are appreciated
Thanks,,
Bernie
|
| mickmate |
06-17-2012 05:18 AM |
Hi Bernie the ends of the two piece shafts are shown in the LJ22 pictures here. Shelley Jacks
There is a good picture and dimensions for the handle for the 6-1/2" although I'm not sure how similar that is to the LJ22. Do you know the size of the square hole in the jack? |
| BERNIE |
06-17-2012 08:46 AM |
Quote:
Originally Posted by mickmate
(Post 1196083)
Hi Bernie the ends of the two piece shafts are shown in the LJ22 pictures here. Shelley Jacks
There is a good picture and dimensions for the handle for the 6-1/2" although I'm not sure how similar that is to the LJ22. Do you know the size of the square hole in the jack?
|
3/4x3/4
Regards |
| mickmate |
06-17-2012 02:23 PM |
Hi Bernie, I have enough information to make one if you can't find one. Let me know.
|
| BERNIE |
06-17-2012 03:08 PM |
Will do ,thanks
|
| rsk289 |
06-19-2012 03:14 AM |
The handles come up quite often on ebay. There are two sizes, and you need the larger (¾" square, as you already know). Before you try to make one it's worth noting that the originals have a sprung ball bearing in them to give better location in the jack.
The wooden 'T' bars are reproduced and also come up quite often.
|
| Dan Case |
06-19-2012 12:49 PM |
Quote:
Originally Posted by rsk289
(Post 1196399)
The handles come up quite often on ebay. There are two sizes, and you need the larger (¾" square, as you already know). Before you try to make one it's worth noting that the originals have a sprung ball bearing in them to give better location in the jack.
The wooden 'T' bars are reproduced and also come up quite often.
|
Cobras/427 Cobras use the plain steel "tommy bar". |
| rsk289 |
06-19-2012 04:14 PM |
Quote:
Originally Posted by Dan Case
(Post 1196486)
Cobras/427 Cobras use the plain steel "tommy bar".
|
Dan, do you have a link or a picture? I've wondered about the tommy bar... |
| Jim Maxwell |
06-20-2012 05:05 PM |
I might have the correct jack handles for you. Please PM me your CSX #.
jim
|
| All times are GMT -7. The time now is 12:05 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
