Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Originality Forum (http://www.clubcobra.com/forums/originality-forum/)
-   -   Harrison tank (http://www.clubcobra.com/forums/originality-forum/116748-harrison-tank.html)

xb-60 08-10-2012 07:14 AM

Harrison tank
 
Any leads on the best places for sourcing a Harrison tank? I have had a brief troll around, looking. No luck so far.
Cheers,
Glen

A/S65 08-10-2012 07:43 AM

Zip Corvettes has them date coded for 184.00 and non coded for 159.00.

Hotfingrs 08-10-2012 07:49 AM

1963-1967 Corvette Expansion Tank (Replacement) | Expansion Tank & Cap | Corvette Parts and Accessories


Find a place that sells Corvette restoration parts... they were used on 1963 to ? vettes

MRGEORGE077 08-10-2012 09:25 AM

http://www.parts123.com/parts123/yb....Z5Z5Z50000027b

bkozlow 08-10-2012 09:40 AM

ecklerscorvette.com Part #A2365---$187.99 undate coded Part #29698---$194.99 date coded, cap #25026--$31.99. Yes, these are a little more expensive than some but Ecklers will stand behing their products. Many of the bargain products LEAK and are made in the Far East.

BillK

MRGEORGE077 08-10-2012 10:42 AM

Here is where I bought my replacement tank after mine started leaking

1961-1962 Corvette Aluminum Radiator Expansion Tank Replaces Original GM 3151016 made in USA

mickmate 08-10-2012 01:42 PM

Flee bay.harrison tank | eBay

xb-60 08-10-2012 09:29 PM

Thanks all. Enough leads there :)
Nick- I had seen the eBay listing; that one has some damage.
Cheers,
Glen

xb-60 08-11-2012 02:48 AM

Brackets and straps....Corvette as well?
 
Tank mounting bracket and straps for the Harrison tank.....are they the Corvette items as well for the Cobra 289 installation?
Cheers,
Glen

Hotfingrs 08-11-2012 04:11 AM

I don't know if they are correct, but I am using them. As fragile as those tanks are, I wouldn't buy a used one. I run two grounds straps also, one from battery to motor and one from motor to frame. I ruined one tank from electrolysis, in less than a year, because of not enough grounding.

mickmate 08-11-2012 04:20 AM

Cobra uses its own bracket and basically a long hose clamp to mount by the leaf spring.


All times are GMT -7. The time now is 08:13 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: