Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Originality Forum (http://www.clubcobra.com/forums/originality-forum/)
-   -   Accusump Hidden Sysstem CSX (http://www.clubcobra.com/forums/originality-forum/128441-accusump-hidden-sysstem-csx.html)

SHORTSTROKE 04-04-2014 08:27 AM

Accusump Hidden Sysstem CSX
 
After looking at what and where to mount the accusump tank. I desided to engineer a mounting syatem .Take a look at the kit design.. Can you see the accusump can ?
CSX 4000 series

Calbullet 04-04-2014 12:16 PM

yup, i can't see it

dallas_ 04-04-2014 01:20 PM

Me either.

750hp 04-04-2014 03:56 PM

It's so well hidden I can't even see a photo!

SHORTSTROKE 04-07-2014 08:04 AM

Pics
 
Quote:

Originally Posted by SHORTSTROKE (Post 1293934)
After looking at what and where to mount the accusump tank. I desided to engineer a mounting syatem .Take a look at the kit design.. Can you see the accusump can ?
CSX 4000 series


Take a look at my page , having a little trouble at this time posting pics ,,,

ACademic 04-07-2014 08:55 AM

Does it have anything to do with the pressure gauge that is in front of the alternator? Otherwise you must have it mounted below the crank pulley somewhere?

SHORTSTROKE 04-07-2014 10:15 AM

Yes and Yes.
I will post more pics this eve.

SHORTSTROKE 04-08-2014 09:19 AM

More pics posted in my album
 
Quote:

Originally Posted by SHORTSTROKE (Post 1294402)
Yes and Yes.
I will post more pics this eve.

More pics posted in my album.
First attempt on designing a clean and secure mount .

dallas_ 04-08-2014 11:56 AM

Looks like you did a really nice job designing and fabricating the mounts.

It would be nice to have some better photos of your engine compartment so we can get a better idea of how you mounted it.

SpeedQuest 04-10-2014 07:10 PM

Really nice engine compartment. The gauge looks like it belongs there. Gives a vintage look!

Ralphy 04-10-2014 07:16 PM

Here you go.

http://www.clubcobra.com/forums/memb...802-csxacc.jpg

Ralphy

SHORTSTROKE 04-11-2014 07:26 AM

The system is designed to bolt-on , you don't drill any holes in your car . It is a 2-3 hour
install without much fuss.
More pics in my album..

I will be putting kits in the CC classified section ,with pics and instructions.


All times are GMT -7. The time now is 02:26 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: