|
What AWG Wire?
What AWG wire was used on the firewall components of original cars? I'm trying to replicate the look and would like to be somewhat accurate in my attempt.
Thanks Bill D |
Bill,
While you are waiting for the answer, I have a question for you. Are you also replicating the electrical loads from the originals (e.g., same output alternator, same amperage ignition, etc.)? It would seem that replicating the look could be a problem if the electrical demands are larger. |
Tommy, the firewall components will not be functional but for original look only
|
Very interesting. Thanks for sharing.
|
I haven't taken an original harness apart, so I'm pretty much guessing but I'd say it's either #14 or #16 for the most part. Keep in mind that there is different size wires depending on what/where they go and what fuse they come from. The other thing to keep in mind is on the engine side, most of the harness is wrapped and not exposed to the elements. It separates at the firewall plugs and whatever device it's attached to. Even behind the firewall, a lot of it is wrapped. Also, on original cars (post 2201 standard leaf spring cars), some of the harness is Ford Autolite and some of the harness is Lucas. There are short connectors with a Ford plug on one end and a Lucas plug on the other separated by a couple inches of wire to connect the two together.
So it kind of depends on how closely you want to replicate it as to what you want to use. Here's a pic of the firewall, less engine with the harness in place: http://i21.photobucket.com/albums/b2...pshd4bttz9.jpg Larry |
Thanks Larry
|
| All times are GMT -7. The time now is 06:40 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: