- -
hood scoop dimensions
(
http://www.clubcobra.com/forums/originality-forum/134943-hood-scoop-dimensions.html)
| wouter37 |
10-23-2015 01:46 PM |
hood scoop dimensions
Hello,
What are the original dimensions of a original hood scoop ? I woul like to make one myself in aluminium.
|
| 1985 CCX |
10-23-2015 04:17 PM |
Originals were glass..............
|
| 1985 CCX |
10-23-2015 04:29 PM |
1 Attachment(s)
This may help...........
|
| wouter37 |
10-25-2015 06:14 AM |
Great thanks
|
| krausewich |
10-25-2015 09:58 AM |
I have 23" long x 14.75 wide. Has roughly .75" flange around perimeter for rivets. About 1 7/8 rise to top when laid on a flat surface (actual rise off hood will be less, more like 1 1/2).
Good Luck, Mike
|
| All times are GMT -7. The time now is 10:35 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
