|
Roll Bar Dimensions
Hi guys
Doing a CSX 2431 replica down here in Australia and was wondering where to find dimensions for the roll bar on the Ken Miles car. ie: radius on the hoop and height above cowl. Seems wider and lower than some others. Thanks Brett |
1 Attachment(s)
Roll bar steel is 1 3/8" tube
12" center About 11" high. Mine is larger diameter but bent at 12" and is 12.5" high |
Thanks Jeff
|
| All times are GMT -7. The time now is 11:24 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: