| Bill D |
11-30-2016 02:04 PM |
Mechanical Gauge Question
Can anyone help with where the mechanical gauge "cables" (oil pressure, water temp, and oil temp) passed thru the firewall for connection to the engine?
Thanks
Bill D
|
| Tim7139 |
11-30-2016 02:15 PM |
All gouped togeather, through a rubber grommet right behind the intake.
|
| Dan Case |
11-30-2016 02:55 PM |
SAI team cars, yes stock fire wall pass through grommets but also unused heater hose passes for oil pressure and fuel pressure sometimes.
|
| 1985 CCX |
11-30-2016 03:46 PM |
1 Attachment(s)
This kinda helps...
|
| Bill D |
11-30-2016 04:21 PM |
Thanks guys
|
| All times are GMT -7. The time now is 01:54 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
