|
Tecalemit grease gun
Does this look correct....?
http://www.clubcobra.com/photopost/d...Grease_Gun.jpg It's around 140mm long and 28mm diameter. Cheers, Glen |
As original to a Cobra or 427 Cobra sent to America, not that I can see in that picture.
The old thread in the AC Owner's Club site has been lost in a website incident but I created a album in this forum to put some of my images in. AC Cars supplied grease guns - Club Cobra Photo Gallery Also because there are multiple taper tip adapters I will add an extra comment on nozzle tips. The ones I expect for USA Cobras and 427 Cobras utilize the small diameter cone that cups grease fittings with a taper at the end with a circumferential groove cut around the straight section near the taper. (There is a similar tip without the groove.) I have examined, have, or have had ones with • two different length body cylinders • three different closed ends, two different pleated versions and a round cap design • several different adapter tips, some tips could be ones owners swapped in somewhere along • two different "GB 2800" embossed caps, i.e. both marked GB 2800 but they are embossed with two different patent numbers • different colors/type of pain on the cylinder bodies depending on body design |
Thanks Dan. As always, excellent information.
Cheers, Glen |
You are welcome.
|
| All times are GMT -7. The time now is 03:19 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: