|
427 Bellhousing and clutch fork
Was wondering if anyone could confirm if SA originally used a Ford bell housing and Ford clutch fork in their 427 builds and if so which combination.
There are many Ford clutch fork combinations but due to frame clearance issues I have read, unconfirmed, that the C4AZ-7515-A 12" clutch fork was used with the big input top loader. The only bell housing ID I've come up with is the C5AA-6394-A that is listed for the 1965-67 427 manual transmission. Thank you Cory |
I personally wouldn't use an oem Ford bell housing if I was going to beat on the car in any way. Granted, the old guys did. They didn't have possible Chinese rotating parts turning 7k rpms three inches from their knees?
|
| All times are GMT -7. The time now is 01:51 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: