- -
427 Radiator angle
(
http://www.clubcobra.com/forums/originality-forum/147688-427-radiator-angle.html)
| Cobra_ZA |
04-09-2024 12:08 PM |
427 Radiator angle
|
| eschaider |
04-10-2024 10:26 PM |
If I were you, I would cut off the angled radiator bottom section and weld on an equivalent square bottom section.
This has several benefits;
- It eliminates unnecessary excessiveness,
- It may simultaneously improve your Period Correct Index score,
- It eliminates the need to coordinate the angle of layback on the Radiator with the angle of the bottom section.
It would be difficult to substantively improve upon these outcomes. |
| twobjshelbys |
04-11-2024 01:58 AM |
Huh? My fluidyne was square all the way around. What you see is just photo angles
|
| DanEC |
04-11-2024 06:46 AM |
I believe you’re right.
|
| Cobra_ZA |
04-11-2024 12:06 PM |
Guys, thanks for the feedback.
What is the approximate leaning as angle of the radiator?
|
| 1985 CCX |
04-11-2024 03:43 PM |
I'd say ~25-28 degrees, I can get better figure when I am out with car.
|
| 1985 CCX |
04-11-2024 05:59 PM |
Just measured.
I’d say 19-21 degrees.
Measured 2 cars, depends upon top bracket length
|
| Cobra_ZA |
04-12-2024 12:39 PM |
Thank you very much.
Does the radiator have a cowl on the sides to ensure all air flow goes through the radiator? I have seen photos that the top has together with the pin, washer split pin arrangement.
|
| 1985 CCX |
04-13-2024 06:14 PM |
Yes the air is directed to radiator.
|
| All times are GMT -7. The time now is 09:41 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
