|
Wanted Weber 48 IDA 42-44mm chokes 8
I am looking for a set of 8 42-44mm weber chokes. Anyone have them for sale?
Thanks Dan H |
I have them for Dellortos....I think they might be the same, but I'm not sure..
|
Dan,
Pierce Manifolds carries the chokes...I had the 42's on my car originally and it ran like crap...speaking with Mark on the comp car they are running 42's but he stated that it doesn't run well stop and go but loves WOT. Are you trying to move up the RPM Range? Matt |
I think Dan at Pierce Manifolds did a calculation and said that the 37mm that I am now running is good up to 4500 RPM that I needed 42's or so to have enought air flow to go to 6,000 RPM's It sounds like I need to check into it further. Matt what chokes are you running in yours?
Dan |
I had 42's in mine and went down to 38's....you will find that the streetability will go down....I was thinking of dynoing mine with both to see what happened just haven't gotten around to it....
its kind of a pain because if you think about it everything will change...the chokes aren't cheap either...and with more air you will need more fuel...just a suggestion but I can get into mine to the rev at 6500 with no problems...peak is at 5500 so yea I could probably move that up but I get there so freakin fast why mess with it for what maybe 10 hp? I got 40 torque from the pipes. Matt |
Matt The more I think about it and after what you have said, I think I will leave well enough alone. I am working on my transmisson problem now and talking to several people to figure that out. You can't beat the good old Top loaders. I just wish they had a 5th gear like the Tremic.
Take care! Dan |
| All times are GMT -7. The time now is 02:19 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: