|
NEED: Rag Joint to manual rack connector
I need the splined clamp that connects the rag joint to a manual rack.
I was finishing up my front suspension/steering install and came to a screeching halt. I changed the donor power rack to a manual one and the splined input shaft on the manual rack is smaller diameter that the power rack was. Did any body go from manual rack to power rack or go to a rag joint eliminator and have the clamp to fit the manual rack? Reply or e-mail me with price and I'll get right back to you. Thanks |
Check with Flaming River, they have just about ANY size/number spline to Shaft connector you can imagine!
http://flamingriver.com/enter.htm RZ |
| All times are GMT -7. The time now is 11:32 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: