![]() |
Fresh air ducts
Hi to everyone out there.
Does anyone have a spare set of fresh air ducts (that fasten behind the oval brake cooling inlets on the front of the 427 body style). curve up 90 deg and then connect to hoses to the footwells ? Used would be OK. Greg |
greg
try cobraearls creature comforts ron |
a breath of NAF fresh air
my427cobra,
Is your NAF a fiberglass foot box/floor pedal brake_clutch FIA car? Very Very close to an original with what size air intake on the nose? (Width ID, Height ID and approx radius dimensions) If so eMail thru Club eMail. grumpy |
Hi Grumpy . My NAF is the 427 body style with fiberglass footwells and a hanging pedal assy.
The brake inlet ducts are 6 1/8" high by 2 1/8" wide ( same dia at top and bottom). If you have the ducts that fasten behind these inlets and are interested in selling them, I'm interested. Let me know. Greg |
AIR DUCT
I MADE MINE.
I USED A MOUNTAIN DEW BOX, DUCT TAPE, SISSIORS, FIBERGLASS KIT, PETROLEUM JELLY. CUT THE BOX AND MADE A MOLD, COVERED IT WITH DUCT TAPE.USED A 2" PIPE FOR THE OUTLET MOLD. THEN COVERED THE TAPE WITH THE JELLY. I PLACED IT AT AN ANGLE TO CLEAR PART OF THE FENDER WELL. LAID THE FIBERGLASS ON THE JELLIED MOLD. LET IT DRY. REMOVE THE MOLD. TRIM AND PAINT BLACK. INSTALL. TOOK ABOUT 2 HOURS, START TO FINISH.:cool: |
| All times are GMT -7. The time now is 12:48 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: