|
Lakewood SFI Bellhousing for tremec 3550/5.0/5.8
I have a used Lakewood SFI bellhousing for a tremec 3550 and 5.0 or 5.8 motor. Also included is a brand new Lakewood block plate ($60 from Summit) and misc. suppied grade 8 hardware.
Located in Atlanta. $150 and i'll handle shipping. |
Brian;
Will it or can it be made to work with a toploader???????????? David |
If i remember correctly it will work with a toploader. I'll do some searching and see if its the same bolt pattern.
|
Brian;
Do you by any chance have the part number for the bellhousing????? I can look it up and see,if it is the correct number,I'll definetly take it............ Going to use a 302 block and toploader and will need a blow-proof bellhousing....... David |
David, The bolt pattern on the Tremec & Toploader are the same but the Tremec input is
longer so the bellhousings are different. Sorry! |
Brian;
That's about how my luck usually runs.....After thinking about it I remembered about the input shafts of the two trans. being different lengths.... Had it been the other way around I could have put a "spacer" plate between the trans and bellhousing to make up the difference..... If anyone else out there has a blow proof bellhousing for a small block Ford and toploader,I'm looking.......... David |
Hey Brian,
I am using a '94' 351W roller bloock and a Tremec TKO or the 500. Seems like you have the parts I need but must be sure. What is the part numbers? Thanks, Jeff |
bellhousing
If you still have the lakewood bellhousing,I would like to buy it,as long as it for a cable clutch?We can do paypal,money order whatever. : my e-mail is ; meldave123@yahoo.com
Thanks Dave |
If no one above me takes it, I will! Let me know.
|
| All times are GMT -7. The time now is 09:27 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: