- -
428CJ heads
(
http://www.clubcobra.com/forums/parts-sale/58867-428cj-heads.html)
| Keithc8 |
11-14-2004 10:17 PM |
428CJ heads
I have 2 sets of 428CJ bare castings that have been cleaned, crack checked and tapped. These are some of the nicest castings I have evr had, seat real high. The heads are bare and will need all work and parts installed. They are 600.00 a set with full refund if not happy. We also have one set of 428CJ heads complete with all new hardware with over size valves. These heads can be purchased for 1100.00 complete. Thanks, Keith Craft
|
| hoppy |
11-15-2004 12:19 AM |
428CJ heads
Keith - How do the complete heads compare performance wise VS either the Edelbrock or Shelby Aluminum heads? Have they been "worked" or just completed?
|
| bomelia |
11-15-2004 07:47 PM |
Now I could be wrong, but it seems I have heard you can get more HP out of the iron heads...but they do weigh a bit more. What do you say Keith?
Are there oiling issues with iron vs the new aluminum heads?
Mike
|
| Keithc8 |
11-16-2004 09:42 PM |
If everything is equal, such as flow and chamber volume you will get more power out of the iron head because of the heat retention. You can not port the cast iron heads as much as you can the aluminum heads and they will not flow as much. The cast iron heads I have were not done by me but look to be nice heads with all new parts. There is no major port work done just a little bowl work. These 428CJ heads should be goos for about 500HP on a 10 to 1 engine with decent camshaft. These heads will flow real close to the Edelbrock heads out of the box. Thanks and good luck, Keith
|
| All times are GMT -7. The time now is 01:31 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
