|
Scale Drawings Cobra Mk II Frame +
This is a 1/2 scale drawing of tube frame.
http://www.clubcobra.com/photopost/d...ehalfscale.jpg This is full scale rear upright. http://www.clubcobra.com/photopost/d...earupright.jpg This is full scale front upright. http://www.clubcobra.com/photopost/d...ontupright.jpg This is full scale rear lower wishbone. http://www.clubcobra.com/photopost/d...erwishbone.jpg This is full scale front lower wishbone. http://www.clubcobra.com/photopost/d...ntwishbone.jpg This is the detail on the leaf springs. http://www.clubcobra.com/photopost/d...ringdetail.jpg I purchased a few copies of these scale drawings in the late 70's. They have been rolled up in my basement since then. Does anyone have any interest in a set? There are five sheets to the set. The edges of some of the sheets have some discoloration but nothing that affects the drawings or measurements. The only challenge is that I have no idea of a fair price. Any input would be appreciated.:confused: |
Yes i would be interested for my collection . How much?
Adrian |
Are these drawings from AC Cars Ltd or somebody that reverse engineered from a bare chassis?
|
I would be interested also. Have no idea of a price.
Bob |
Quote:
As I remember someone reverse engineered them. But I don't know who it was. Nothing is noted on the drawings that mentions AC Cars. |
No need for the whole set, but REALLY need the specs on the rear spring. My Hi-Tech has the sags and I need to have the spring remade.
|
Those look like the same ones I purchased off of Jim Thomas. While they are pretty good, there are many inconsistencies in them, especially on the half size frame sheet.
Anyway, even though I have most of them in CAD right now, I would be interested in a set as they seem to be clearer than the ones I currently have.
|
Re: Scale Drawings Cobra Mk II Frame +
Quote:
I paid $125 from Jim. A-Snake, since your signature says you own an original Cobra, perhaps you would measure some things for me in the future? :) --Mark |
Have you sold them yet? I would be interested. Heck, I'd even pay for copies.:)
|
| All times are GMT -7. The time now is 02:53 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: