|
Isky cam, lifters, push rods for sale
Put a hydraulic roller in my engine, so the old set up is for sale. Engine had 6000 relatively easy miles on it (only road raced on the track 2-3 times).
Isky solid lifters and cam part# 351390: .050 Duration 250o, Valve Lift =.525, EE-390 Grind Comp Cams chromoloy push rods Estimated new cost $360. Asking $175 |
Still for sale and cluttering up the garage - make me an offer!
|
Are the lifters the shell type? Do you know which lifter matches each cam lobe? Let me know.
|
Hmmm...good question George. I got the stuff back from Keith Craft in boxes and don't know for sure if there's a way to match the lifters up to the cam. I will check as I haven't actually opened the lifter box excpt to see what was in it.
If I was looking at them, how would I tell if they were the "shell" type? Not familiar with that description. They were in the engine when I bought it so don't have all the details, but do have a stack of receipts from the original builder that I can scan through. Thanks! |
Shell lifters will look like an empty glass. The hole goes almost to the bottom of the lifter.
|
ford_george
Doesn't appear that they are the shell type. The "cup" is only about 1/4" from the top edge of the lifter. Also, they are not marked for the cam so don't know which lobe each one goes to. However, they only have 6000 easy miles on them, but don't know if that matters. Push rods also look like new.
http://www.clubcobra.com/photopost/data/500/lifters.jpg |
| All times are GMT -7. The time now is 07:47 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: