-
Parts Wanted
(
http://www.clubcobra.com/forums/parts-wanted/)
- -
flexplate
(
http://www.clubcobra.com/forums/parts-wanted/11314-flexplate.html)
flexplate
looking for a flexplate, t-5 transmission, and bellhousing for 351w.
if you can help me out please e-mail at blystone100@hotmail.com. thanks. |
| Jack21 |
09-29-2001 09:32 AM |
Any '84 up 302/5.0 Mustang T-5 equipped bellhousing will fit the 351W. Just replace the fork and fulcrum with new ones.
You don't want a flexplate, they're for automatics. T-5's use a flywheel. Do yourself (and your legs) a favor and get a new one, billet steel, 157 tooth, 28in/oz balance. Production flywheels are cast iron and can come apart at high rpm.
|
| Jack21 |
09-29-2001 09:43 AM |
Same for the T-5 tranny. All production Mustangs used 3.37 low to give the 2.73 rear geared cars some acceleration. Their torque rating was not that good, and they have even less of a lifespan behind 351's. The 2.95 low world class units are a lot stronger but you have to get them new. I got mine from Liberty Transmissions who blueprinted the unit, and installed a .80 overdrive gear. At 75 MPH, the engine is ticking over at 2500 RPM.
|
| All times are GMT -7. The time now is 03:51 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
