|
Needed: donor Mustang power steering rack, lines, pump, etc....
I'm taking out my Flaming River 18:1 rack, and replacing it with a power steering set up and a Heidts valve. When I got my car, it had a power steering set up, but we threw it all out when I put my 18:1 FR in, as we never thought we'd need it again! Do'h!!! :CRY:
Does anyone have an old, usable Mustang quick ratio power steering rack, pump, lines, etc... from a donor car that they were just going to throw away or could sell super cheap?? Thanks. Steve |
Rack & pinion?
I have a power rack & pinion unit for a SVT mustang. The pump is off a 71' mustang, I think. You will have to get lines made or make them yourself. Interested? $150.00 for all. Note: it needs to be cleaned. |
| All times are GMT -7. The time now is 09:12 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: