-
Parts Wanted
(
http://www.clubcobra.com/forums/parts-wanted/)
- -
351C Block
(
http://www.clubcobra.com/forums/parts-wanted/45518-351c-block.html)
351C Block
I am in need of a good 351C block in the Atlanta GA area. It needs to make a .040 over bore with no sleeves. 2 bolt main is fine.
Thanks, Tim
|
| Woodz428 |
09-20-2003 06:46 PM |
If you can't find one any closer I have 4- 5 standard bore engines and a CJ shortblock (actually the complete engine if I yank the heads off my rod). Just let me know. Who made the headers for your sidepipes amd are they still around?
|
Thanks for the compliment on the headers. I made them! I will definatly keep you on the list for a block source.
|
| rdorman |
09-20-2003 07:43 PM |
careful
be sure to have the block sonic checked. cleveland are thin wall castings and generally 30 over is the max
Rick
|
| Woodz428 |
09-21-2003 06:22 AM |
Rick,
Good point, I wouldn't advise( or even suggest) going .040 over. Even if it does, should something go awry, and things sometimes do, you'd be looking for another block or sleeving.
|
| ENTDOC |
09-21-2003 07:00 AM |
The ford engine parts interchange book by George Reid says it is fine to go to .060 over in a 351c.I do not know first hand .Also keep an eye on EBAY,you may find a good block close by. chuck
|
| rdorman |
09-24-2003 02:55 PM |
Don't listen to George! Regardless, if you are doing much of an overbore you should have the block thoroghly checked. Better safe than sorry!
Rick
|
| All times are GMT -7. The time now is 05:46 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
