-
Parts Wanted
(
http://www.clubcobra.com/forums/parts-wanted/)
- -
Jag Irs
(
http://www.clubcobra.com/forums/parts-wanted/58217-jag-irs.html)
| 1meansnake |
10-23-2004 09:47 AM |
Jag Irs
WHO CARRYS THE JAG IRS SUSPENSION SETUP:LOL:
|
| Excaliber |
10-23-2004 11:23 AM |
ERA has a nice "standard" with inboard brakes and a great "race" version with outboard brakes, modified axles and uses alloy for lighter weight.
|
| silverback |
10-23-2004 11:31 AM |
try goerge petrus with accurate machine products 310 370 4075 goerge has made some real nice 6 pin knock offs for one of my cobras a little expensive but very nice man and does good work.......mahlon
|
| Bruce Edwards |
10-23-2004 05:08 PM |
Your Street Best car is not set up for the Jag set up. We have installed jag rear ends in non jag set up cars in the past but it can be tricky. You best bet mya be to get a used one from a jag and modify it to fit your frame and body set up. There are some folks around that deal in used jag rear ends in the central Florida area.
We can help with that if you wish.
|
| 1meansnake |
10-24-2004 08:00 AM |
IRS
THANKS FOR THE INFO. THE OTHER OPTION I WAS LOOKING AT WAS A 4 LINK WITH FAB 9 REAR. WHAT DO YOU RECOMMEND?
|
| Bruce Edwards |
10-24-2004 09:04 AM |
JB,
As I recall Street Best frames are set up for the late model Mustang Fox body link with the 8.8. What kind of engine and HP are you planning? If you are staying with a mostly stock 302 don't worry about it. If you are going to the 400+ range you will need to install a stronger rear end in the car. You can cut down a 9 to fit and weld on all of the attachment points so it will work in place of the 8.8.
Of course that is still a solid axle.
|
| 1meansnake |
10-24-2004 09:18 AM |
irs
i am going to put in a 351 stroker with about 485hp
is the fab 9 and 4 link ok? :3DSMILE:
|
| Bruce Edwards |
10-24-2004 09:32 AM |
Should work out fine. The 9 is much stronger and has been a main stay on NASCAR for years. Just make sure the links are as strong as the rest of it.
|
| relaxinrob |
10-24-2004 01:51 PM |
I have a 4-link and a fab 9" from Currie. They do a great job.
|
| 1meansnake |
11-02-2004 04:36 PM |
rear suspension
APPRECIATE THE INFO
THANKS
|
| All times are GMT -7. The time now is 01:35 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
