|
Viper T56 Transmission housing wanted
Maybe to new for many secondhand housings, but would be interested in a stuffed trans with a good case.
|
Ant,
I don't know if you want to deal with him or not, but I left an "almost" perfect T-56 Viper tranny behind when I sold 'Classic by Elite' to Jay Kowalik-740-852-5280. The 1st-to- second synchro was going out due to using synthetic oil in it. NOTE: Be carefull how you handle the money exchange if you buy it. DV |
Viper Trans housing
DV,
Dealing from the other side of the world is not normally any different than being there, but it may be if the guy is .............?!?! My aim is to have the Viper case for the best shifter position to suit my app, and have it sent to PA to be remanufactured with new internals, and keep the cost down a bit! I should give him a ring, but I have been tucked before, also maybe there is a way I am happy to pay anyone for their troubles, to procure a trans and send it. You may know someone else that deals with this stuff, that I can contact? Thanks. |
I
Ant,
I answered your message...anything else I can do let me know. DV |
Viper T56 transmission housing wanted.
Hey DV,
I have sent you a PM, I think I will give this guy a miss I am to far away to go and get it etc, and make sure I have the transmission in my hands! I will hope something else turns up from a reputable supplier..! Thanks. |
D and D transmissions does a lot of tremecs and viper trannys. I had called them in the past about possibly buying one from them, and they sounded like they knew what they were talking about, but instead I used a toploader. They advertise in 5.0 Mustang magazine, or superford or some ford magazine.
|
Viper housing
Anthony,
Thanks D&D have good products, but I am hoping to go to a full G-force box, as you may be aware they are very pricey, in fact almost out of my budget! I am going to have close to what the D&D Viper trans hp and torque rating is, so I would sooner go for overkill as G-force is rated at 800ftIbs and 900bhp, plus the gears are between straight and helical cut gears (a moderate whining noise) and the triple cone syncros on all gears should do it! I dont suppose there are many Viper trans cases around due to the fact they are haven't been around that long! |
| All times are GMT -7. The time now is 11:55 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: