|
Mustang II Tubular Lower Arms
I need a set of lower tubular arms Mustang II if anyone has a set they don't need..
Mike |
1 Attachment(s)
I have a new unused set of Heidts I would sell. This is the type that needs a bracket welding to the front crossmember and needs no control arm. They get $249 for them, how about $180 and I'll throw in the ball joints. Let me know if your interested.
|
Check out Speedwaymotors.com
http://www.speedwaymotors.com/xq/asp...qx/Product.htm I have a set of upper and lowers I've not installed yet, next winters project. Had them Powder coated. Fairly straight forward bolt on. |
G.R.
There are like 4 different lower control arms listed there. Any idea what the difference is with all of them? |
mickmate
Thanks for the offer but I hate to muck my freshly powder coated frame with fresh welds.. ;>) |
No worries, good luck with it. Heidts has the tubular lowers for the factory set up also if that will work.
|
Mickmate....reading this old forum and wondering if you still have those lower control arms for the mustang II available?
John |
John S.,
The MII arms inside mounting points do not weld in the same location that the AC/MKIII chassis points, MICK and others have been thru the geometry layout phase and know this. If you welded them as the frame plans that are out there are dimensioned, will have a different track, unless you use a very different upper arm to compensate for the new lower arm geometry. grumpy |
I still have them and some tubular uppers available. I may also have some 2" drop uprights to complete the package. It is all original MII geometry. Let me know if your interested.
Cheers Nick |
Mickmate.
I'm interested in that package you have. What kind of $ are you looking for? John |
Grumpy.
I've already delt with this as well and the upper and lowers he has work great, just looking to pick up another set for a possible future project. John |
I'll stick with $180 for the lower arms in bare steel. The uppers are early FFR powdercoated black, $150 for them. I'll find out a number on the Heidts dropped spindle if you like. I have some photos of them I'll try and dig up and post.
|
mickmate...how about 3 bills for control arms?
JP |
Throw in $20 for boxing and shipping and I'll mail them to ya..........
|
Great.. pm me the info and I'll drop a cashier's ck in the mail.
thx jp |
| All times are GMT -7. The time now is 03:27 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: