|
Victor Jr for 351
I am thinking about going to a single plane Victor Jr mainfold Anyone have one for a 351 with 9.5 deck height the part number is #2981
|
SORRY JAY DON'T HAVE ONE ,BUT WOULD LIKE TO KNOW IF YOU CAN RECOMMEND SOME ONE IN THE JUPITER AREA THAT CAN DO A REPAINT ON MY COBRA .SOME OF THE GUYS HERE IN THE STUART AREA ARE KIND OF HIGH LOOKING FOR SOMEONE THAT CAN WORK ON FIBERGLASS AND IS GOOD.
THANK YOU COBRA 36 E-MAIL janton7104@aol.com |
The last three of the FFR guys in Jupiter went to Stuart for there bodcy work and paint. I think the price was the same as the second choice who is in Palm Beach Guardens. I-95 and North Lake. Complete job paint and body work $3,500. (body off the frame). If you want the name of he guy in Stuart they used I will ask around. BTW ever go the the Treasure Coast Mall car show every Tuesday night?
|
I have a Vic Jr. For 351w that I don't need. I'm not sure about the deck height but it came off a 1971 casting that I think was 9.5". I checked the intake and there is no part number on it.
|
jhein,
YOu say it off a 1971 Casting. Does that mean a '71 block? |
I also have a vic jr. that was removed last week from my 351w "R" block. Iam changing manifolds so no longer need the jr. Will check numbers tomarrow and get back to you. Do you need a full race cam and solid roller lifters????
|
Bill,
Don't need the cam just installed a new Tirck Flow phaseIII using hydrolic roller lifters. But please get back to me on the mainfold. BTW what is an "R" block, and does it have a 9.5 inch deck height. |
Jay,
Yes, I believe it was a 1971 block and 9.5 deck height. I replaced the Vic Jr. with a RPM air gap. The Vic Jr. was on the car for about 2 years and is in good condition aside from needing to be cleaned up. I no longer have the car so I don't have much use for the intake. John |
JayBar, Sorry for hijacking you thread!
Bill and John, I'm in the build process on my engine and am thinking about using a Victor Jr intake. I'm curious why both of you went to other manifolds. Something wrong with the V-Jr or something you didn't like about it? Larry |
JAY B The victor jr. is for a 351 W with a part # EDL 2981. I removed the manifold and the cam to make the engine a little more street frindly. RPM range for the jr. is 3500 to 8000.
I have a 1" spacer to go with the manifold. I would like to get $150. + shipping. The Ford R block is a 4 bolt main sold as a after market block for racing. |
Bill,
That sounds ok to me. Send me and e-mail so we can workout payment and shipping. JayB(at)pobox.com (stated that way to ward off spamers) |
Bill,
That sounds ok to me. Send me and e-mail so we can workout payment and shipping. JayB(at)pobox.com (stated that way to ward off spamers) |
| All times are GMT -7. The time now is 07:57 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: