| MY 401K |
04-17-2007 06:39 AM |
inspection parameters by reqions in NYS
Goodmorning all,
I am looking for the breakdown of what inspection specification/requirements apply in New York State for Custom Vehicles. Depending on your location, you might need a Sniffer(idle) test or a PCV test. There has to be a listing somewhere by Zip Codes (NOT Counties) for the different requirements but I have been unable to find it.
John
|
| computerworks |
04-17-2007 06:48 AM |
From NYS brochure...
Quote:
A High Enhanced emissions inspection is required for vehicles registered in the nine county New York Metropolitan Area (NYMA) of Nassau, Suffolk, Rockland, Westchester, and the five counties within New York City, The purpose of this inspection is to measure the amount of hydrocarbons, oxides of nitrogen, and carbon monoxide pollutants coming from the vehicle exhaust. The High Enhanced emissions inspection includes a Simulated driving condition test (on a dynamometer) for gasoline powered vehicles, 1981 model year and newer, that weigh 8,500 pounds or fewer. An "idle emissions test" (engine at idle only) is required for gasoline powered vehicles that weigh more than 8,500 Pounds, are less than 26 model years old, and were manufactured for the 1980 model vear or- older.
A Low Enhanced inspection is required for vehicles registered in counties outside this area. Vehicles registered in counties within the Low Enhanced inspection area are not subject to the sit-simulated driving condition test or the idle emissions test.
In all areas of the state, the High Enhanced and Low Enhanced emissions inspections require a check for the presence and connection of required pollution control devices. The vehicle's gas cap is also checked for its presence, condition, and proper fit. In addition, an "on-board diagnostic" (OBD) check is required for vehicles of model year 1996 and newer.
The following pollution control devices are examined if the vehicle was originally manufactured with them. The vehicle model years affected are indicated.
* Positive crankcase ventilation system (PCV) - 1968 and newer.
* Catalytic converter (CAT) - 1975 and newer.
* Fuel inlet restrictor (FIR) - 1984 and newer.
* Exhaust gas recirculation valve (EGR) - 1973 and newer.
* Thermostatic air cleaner (TAC) - 1984 and newer.
* Air injection system (AIS) - 1984 and newer.
* Evaporative emission control (EVAP) - 1984 and newer.
|
|
| MY 401K |
04-18-2007 10:14 PM |
Ron,
Thanks. That was the same info that I received from Tech Services.
John
|
| Cashburn |
08-10-2007 01:21 PM |
Pre-'74 block will get you the emissions exemption.
|
| All times are GMT -7. The time now is 03:17 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
