-
Run & Gun
(
http://www.clubcobra.com/forums/run-gun/)
| WildBill3 |
11-11-2007 12:15 PM |
forum wont let me in
maybe its for the best;) ? but it says iv been gone to long can any moderaters help in the runngun forum site i cant get in:CRY: !WB3
|
| 951mat |
11-11-2007 01:04 PM |
|
| ROUSHAC |
11-11-2007 01:40 PM |
Bill, try re-registering with another slightly different name until they can straighten it out.
I just looked at the member list on the Run 'N Gun forum and you are listed as WildBill3 with zero posts. I believe that is not correct as I think that I have seen your posts there.
Good luck!
See you there again next year.
|
| dlampe |
11-11-2007 02:24 PM |
Sorry Bill, Clois and I talked it over and it is better this way.;)
Seriously, Follow Dave's instructions and we will get it sorted out soon.
|
| 951mat |
11-11-2007 03:00 PM |
Seriously Dean, shouldn't you be taking something apart that you shouldn't?:)
Mat
|
| dlampe |
11-11-2007 05:57 PM |
As a matter of fact I did that yesterday. Now my car is disabled! :CRY: I took my half shafts out and sent them back to get some "better" ones which are the wrong size. Now I just want to get it back to where it was before I started "fixing "it. I guess you are in the middle of a total engine rebuild. How is that going?
|
| 951mat |
11-11-2007 06:08 PM |
The motor is at the machinists. Maybe I'll know by wed if the crank is salvagable or not. I guess worst case will be a new crank and maybe rods, as my rods are from a 400??? Now that I know I'll have a stoker motor, I may as well open up the heads get a bigger carb..... Just what I need, 500 RWHP!
Mat
|
| WildBill3 |
11-12-2007 05:28 PM |
well i tryd a little diff user name and it said e mail allready registerd to a to a registerd user.#@$%& so when i try to log it says my password cannot be retreived because my account is inactive,so if you could look at my accout and tell me what the password is maybe we can go from ther,i thought i ws using the right one but maybe not, thers so many on my lists.hhhmmm thanks for the help.Dean was that pump info any help?sounds like you got your hands full anyway..
|
| Fran Hall RCR |
11-12-2007 05:59 PM |
Lampe,
I guess it serves you right for messing with perfection....:p
|
| RICK LAKE |
11-14-2007 05:55 AM |
Don't forget the frame bushings for the front bar
dlampe Dean don't forget to get the new solid bushings for the front stablizer bar in. Was talking to Clois, your road racing times are getting to fast, we voted to add 200 pounds to slow you down.:eek: :rolleyes: ;) :LOL: :LOL: :LOL: The other thing is NO POWER ADDER for you. Rick L.
|
| Clois Harlan |
11-14-2007 08:23 AM |
Bill,
I think I fixed it for you. Dont' wait so long to visit next time.
Clois
|
| WildBill3 |
11-14-2007 05:17 PM |
thanks Dean and Clois for your help you guys are great!!
|
| All times are GMT -7. The time now is 11:27 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
