Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Scratch Builders Forum (http://www.clubcobra.com/forums/scratch-builders-forum/)
-   -   Radiator hose part numbers? (http://www.clubcobra.com/forums/scratch-builders-forum/103162-radiator-hose-part-numbers.html)

Three Peaks 03-02-2010 11:35 PM

Radiator hose part numbers?
 
I am looking for the part numbers for the two radiator hoses from the water pump to the lower radiator connection on the original style chassis. I know mine will be slightly different because I'm using a small block, but at least I will have a starting point.
Anyone know what the part numbers are for these hoses or where I can get them? Also, the 90 degree aluminum pipes for the top and bottom elbows to connect the hoses?

Thanks,
Bob

mickmate 03-03-2010 05:44 AM

Hey Bob, I have stainless ones. The end hoses for them are straight rubber.

Three Peaks 03-03-2010 05:52 PM

Nick,
I'll send you an email regarding the pieces.

Thanks,
Bob

Rick Parker 03-04-2010 09:24 AM

Make a pattern from some stiff wire and take it to your local parts house, you can find one or more formed hoses that will form the bends as needed.

Three Peaks 03-13-2010 09:23 PM

Installed the bottom stainless bent coolant pipe with just a couple 3" pieces of straight radiator hose at the radiator and water pump connections and it fit like a glove. Slips into the gap in the X-brace and when the hose clamps are tightened up, it doesn't touch a thing. If I have a chance in the next couple days, I'll post a pic or two.

If you guys have a chance to pick up some parts from Nick (Mickmate) you won't be disappoointed.....

Bob


All times are GMT -7. The time now is 01:39 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: