|
Good to know that you are happy with Wray. He's got my old Jag in his shop right now for new panels :)
|
Kevin
Looks awesome. Can't wait for you to be back on road. Sorry for high jacking thread....,, Greg Frames and skins can be had locally in CA. Racewhere, McKluskey could help. I would start with Racewhere as it might be better budget item. Kevin is right need to have car in person. Hard to do by mail. The old HiTech also could help. Tim G (HiTech) has parts of frames made so you can Customize yourself for reasonable money. Others will cost way more. Tim will be sending me door kit frame for car 2. Will need to finish here on car as it's no huge deal. All depends on your ambition. In The East there are a couple pros that could help one being Rare Drive, Panel Craft etc. Also Alan Burish is good source in Midwest. Call or email if you need help. |
Hi Randy,
I don't know if you have seen Wray work with aluminum but he is an absolute artist. His new shop is incredible. I think you will be very pleased with his work. |
Thanks Jeff. Googgled "Racewhere" with no luck. Any more info to get me to a site?
Cheers Greg |
Found "Racewhere" as a seller on e-bay. I'll try to contact them.
Cheers Greg |
Quote:
|
I'm that jealous!
|
Wow! Amazing!
|
Great to hear the testimonial & see the product of your learning. I'm trying to figure out the best time to take his class. Can't wait!
|
5 Attachment(s)
I am planning on going back this December to finish my doors. Mickmate has been helping me modify and fit my Hi-Tech door frames which needed a lot of work as they were originally designed to be used with fiberglass skins. Nick added a lot of original touches to the door frames and we replicated the original style ferrule tubes and brackets, added original style hinge plates and the door alignment pin tube as can be found on original Cobras We also added new original style hinges. We started to flash the doors yesterday so they should be ready for skins in December. I have included a few pictures which show my progress from day 1 through yesterday. Once the doors are done, I will post more pictures with a lot more detail.
|
Looks like fun!
|
Aluminum panels
Wow! Looks great.
|
Great looking work going on there, I know how much work you guy's are putting in.
Can't wait to see the car when done. |
WOW, nicely done!!!
:D |
Very nice!
Larry |
| All times are GMT -7. The time now is 09:19 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: