Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Scratch Builders Forum (http://www.clubcobra.com/forums/scratch-builders-forum/)
-   -   Factory 427 wheel base and widths (http://www.clubcobra.com/forums/scratch-builders-forum/73818-factory-427-wheel-base-widths.html)

rat_rod_russell 12-13-2006 04:56 PM

C4' have been done, the c5 has only been done in a funny strech project that looks like a convertible corvette with cobra fenders, its just plan bad. take a look at the other forum to see the c5 chassis, it takes some mods but it fits. and its better for the rear.

danc30 11-05-2007 07:44 AM

Quote:

Originally Posted by LMH
From csxinfo.net for a comp 427:

Tread Front............................................. .... 56"
Tread rear .................................................. .58"
Wheelbase .................................................. 90"
overall length............................................ . 156"
overall height ...............................................49"
overall width ............................................70.5"
weight............................................ .. 2,150 pounds

HTH,
Larry

Tread widths are what? Outside to outside measurment of the tires?

63mercury 11-05-2007 07:39 PM

center of tread or flange where wheels fit against.

mickmate 11-05-2007 08:35 PM

Center of tread to center of tread is tread width or track. Flange to flange is another measurement that only equals tread width when the wheels have zero offset.

danc30 11-06-2007 07:21 AM

Thanks for the clarification.

Badsnake427 11-06-2007 07:37 AM

http://www.clubcobra.com/photopost/data/500/Info1.jpg

Found this on another site. :)


All times are GMT -7. The time now is 06:03 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: