- -
Help Help !!!!!!!
(
http://www.clubcobra.com/forums/scratch-builders-forum/84077-help-help.html)
| 63mercury |
11-25-2007 08:35 PM |
Help Help !!!!!!!
Help, I need the use of a reamer (1.5 in. taper per ft.) to do my spindles. I am looking to borrow(rent) or pay to have it done. I live in N.E. Michigan about 4 hr north of Detroit. Any help would be appreciated.
|
| Three Peaks |
11-25-2007 10:09 PM |
Why do you need a reamer?
Reason I ask is I thought I needed one and found I had the wrong tie rod ends for my Mustang II spindles and Flaming River Cobra rack. Finally found the right tie rod ends at Flaming River and everything fit together perfectly.
The other option is to buy heim joints for your tie rod ends as in a bump steer kit, and drill out your steering arm to 1/2" for the bump steer bolt to fit.
Bob
|
| 63mercury |
11-26-2007 07:42 AM |
Thanks , but I need to fit the ball joints to my spindles, fasterpatrick had to do the same thing to his.
|
| Rick Parker |
11-26-2007 11:08 AM |
Take spindles to a race car chassis shop. Simple job.
|
| 63mercury |
11-26-2007 07:26 PM |
around this area there ain't no such place, I'm an oddball because I play with cars. If you don't hunt,fish or play golf youre considered strange in these parts.
The closest race shop is about 3hrs south of here,I think I will be purchasing one for myself after Christmas unless I find one before.
|
| tcrist |
11-26-2007 09:39 PM |
|
| 63mercury |
11-27-2007 07:08 PM |
Thanks for all the help guys, I borrowed a reamer today and the spindles are done now I'm waiting for the guy to finish the inserts for my suspension so I can continue on.
|
| fasterpatrick |
11-27-2007 07:53 PM |
Great news, You stayin warm out in the shop? Glad to see you could find someone with the right reamer. Now you can put stuff together and keep fabbing up parts, post pics soon; Patrick
|
| All times are GMT -7. The time now is 08:50 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
