- -
Dual master cylinders
(
http://www.clubcobra.com/forums/scratch-builders-forum/95258-dual-master-cylinders.html)
| alfy65 |
03-06-2009 06:43 PM |
Dual master cylinders
|
| mickmate |
03-06-2009 07:09 PM |
Nice Alfy, there are a couple of Excel spreadsheets out there too and I also made one up where you can just put your values in and it will give you the front rear balance. I based mine on Paved Track Stock Car calculations that disagrees somewhat with his theory of giving it a little too much rear and then choking it off to suit. They recommend balancing as closely as you can with the hydraulics and liked to see I think 66% on the front.
|
| alfy65 |
03-06-2009 07:46 PM |
Dual masters
Mick,
I agree , I am setting my bore size to the pedal ratio which is about 5.5 to 1.Then I should be able to fine tune with the balance bar.I will have the gauges in dash to watch pressure value between front and rear.Sounds good in theory at least...
|
| All times are GMT -7. The time now is 03:34 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
