Jag Control Arm/half-shaft length
Are there any Shamrock owners that can tell me what the length of the Control arms and half shafts are for the rear. I seem to have some un-modified shafts and control arms that may need to be shortened. First measurement seems to be around 11.5"
Thanks |
good morning,
I know the machine shop who cuts them, but honestly Shamrock should be able to answer that question. let me know If you don't get any measurements and I swing past him to have a look. Dominik |
Thanks. I found out that we had the ones that were the correct length.
|
All times are GMT -7. The time now is 10:55 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: